Mikrotron EoSens CAMMC1186, Reference Manual, Page: 62 / 98

Image Format Control
MIKROTRON GmbH 8 ‐ 2
Introduction
These commands allow to set the size of the image, the so called
region of interest (ROI). A ROI
‐ like the red field in the figure below ‐
defines the part of an image to be scanned. It is defined by its Width,
Heigth, OffsetX and OffsetY.
Name Access
Length
[Bytes]
Register
Interface
Page
RegionSelector R/W 4 Enumeration 8 ‐ 3
RegionMode R/W 4 Enumeration 8 ‐ 3
RegionDestination R/W 4 Enumeration 8 ‐ 3
Width R/W 4 Integer 8 ‐ 3
Height R/W 4 Integer 8 ‐ 3
OffsetX R/W 4 Integer 8 ‐ 3
OffsetY R/W 4 Integer 8 ‐ 4
SensorWidth R 4 Integer 8 ‐ 4
SensorHeight R 4 Integer 8 ‐ 4
WidthMax R 4 Integer 8 ‐ 5
HeightMax R 4 Integer 8 ‐ 5
PixelFormat R/W 4 Enumeration 8 ‐ 5
TapGeometry R 4 Enumeration 8 ‐ 6
Image1StreamID R 4 Integer 8 ‐ 6
DeviceScanType R 4 Enumeration 8 ‐ 6