Mikrotron EoSens CAMMC1186, Reference Manual, Page: 30 / 98

First Steps
MIKROTRON GmbH 4 ‐ 2
Connect Camera and Image Processing System
Before you start, make sure that all components of the camera/host
chain like camera, connectors, cable and frame grabber as well as the
software are fully CoaXPress V1.1 compliant.
Step 1.
Install the frame grabber in your image processing sys ‐
tem (read the documentation of the frame grabber)
Step 2.
Switch off the image processing system (e.g. PC)
Step 3.
Connect the DIN V1.1/2.3 cable with the camera
Tip: In order to connect the
camera via SFP+ modules:
For more information see
" C o n n e c t i n g t h e K AYA
Komodo Frame Grabber " on
page 3 ‐ 5.
Step 4.
Connect the other end of the cable with your CoaX ‐
Press V1.1 compatible frame grabber
Step 5.
If an external power supply is needed, connect the
power supply NTCAM132x (12
‐ 24 V) via the 12 pin
Hirose connector with the camera
Step 6.
In case you want to connect an external trigger take
the pinning into account. For more information see
"
Connecting an External Power Supply or I/O Signals "
on page 3 ‐ 6.
CXP Camera
Cable DIN/DIN or DIN/BNC
Frame Grabber
Image Processing
System