Mikrotron EoSens CAMMC1186, Reference Manual, Page: 11 / 98

Legal Information
MIKROTRON GmbH
1 ‐ 5
Warranty and Non-Warranty Clause
Warranty is described in §8 of our General Terms and Conditions
which can be downloaded on MIKROTRONS’ web
‐ page:
www.mikrotron.de/en/terms.html
In addition, take the following non ‐ warranty clauses into account.
Note The camera does not contain serviceable parts. Do not
open the body of the camera. If the camera has been
opened, the warranty will be void.
WARNING! The camera has to be used with a supply voltage accord ‐
ing to the camera’s specification. Connecting a lower or
higher supply voltage, AC voltage, reversal polarity or
using wrong pins of the power connector may damage
the camera. Doing so will void warranty.
Note Our warranty does not protect against accidental dam ‐
age, loss, or acts of nature.
Note MIKROTRON cannot be held responsible for the loss of
data. We recommend a backup plan.
In case of warranty, please, make a note of the camera type and its
serial number (S/N).
You find all necessary information on the identification plate of the
camera.
Before sending back the camera, ask for a RMA (return merchandise
authorization) number and RMA form either by:
phone: +49
‐ 89 ‐ 7263 4250 or
e ‐ mail:
service@mikrotron.de
Then send the camera back to your distributor. If no distributor is
available, send it back to MIKROTRON. You find the address on the
last page of this reference guide.