ࠉࠉ
1
1
䠊
INTRODUCTION
For correct operation, maintenance and service of Reversible Compactor, please read the separate operation manual
before your work for your safe work.
For the handling of engine, please read the separate engine operation manual and maintenance/service manual.
This service manual explains the maintenance standard and how to disassemble and assemble for Reversible Compac-
tor. Please read this service manual for a better understanding of the maintenance standard, the structure and function
of each part.
To improve the performance and quality of this machine, the change might be made in this machine without notice. If
you have any questions, please contact with our distributor. For parts list, Mikasa WEB parts list is available at our
homepage (http://www.mikasas.com/).
䖃
䖃
䖃
䖃
2
䠊
WARNING SIGNS
The triangle shaped marks used in this manual and on the decals stuck on the main body
indicate common hazards. Be sure to read and observe the cautions described.
Warning labels indicating hazards to humans and to equipment.
DANGER
䟿
WARNING
䟿
CAUTION
䟿
CAUTION
䟿
Denotes an extreme hazard. It calls attention to a procedure, practice,
condition or the like, which, if not correctly performed or adhered to, is
likely to result in serious injury or death.
Denotes a hazard. It calls attention to a procedure, practice, condition
or the like, which, if not correctly performed or adhered to, could
result in serious injury or death.
Denotes a hazard. It calls attention to a procedure, practice, condition
or the like, which, if not correctly performed or adhered to, could
result in injury to people and may damage or destroy the product.
Failure to follow the instructions may result in damage to property.
䟿
(without at )
3
䠊
CAUTIONS FOR MAINTENANCE TO SECURE SAFETY
Do not work indoor or inside a tunnel where ventilation is poor. The emission from the
engine contains toxic gas such as carbon monoxide, and it is very dangerous if this
toxic gas and dust are inhaled. Also, to improve ventilation, please keep a proper
distance between this machine and a building when operating the machine.
Maintenance should be done in a place with a flat and hard surface to keep the
machine stable. Also, do maintenance at sufficient work space.
Before maintenance work, clean the floor. Oil on the floor, in particular, becomes the
cause of falling accident.
For maintenance work, have sufficient lighting in the work site. A portable lamp used to
illuminate the work area has to be protected by wire. In case if the lamp is broken, fuel
and oil might ignite.
To prepare for an accident, please have emergency medical supplies and fire
extinguisher ready at an easily accessible area.
3.1 Work Site
䖃
䖃
䖃
䖃
䖃
CAUTION
䟿
DANGER
䟿