20
d. Assemble the springs to the accumula-
tor. Then, compress the springs with the
spring compression tool until the thread on
the end of accumulator shaft is out com-
pletely. (Fig.49)
Assemble the spring holder with the spring
holder disassembling tool. (Fig. 50)
The spring holder tightening torque
㸸
20N
࣭
m
Remove the spring compression tool.
By the above steps, the assembly
of hand pump and accumulator is
completed.
d.
e.
f.
Fig.50
Be very careful not to have your fingers get
caught between the springs and spring com-
pression tool.
CAUTION
䟿
When assembling the spring holder, be very
careful for the spring pressure.
CAUTION
䟿
The thread on the end of
accumulator shaft
Fig.49