background image

13

WIRELESS DRIVE-ALERT ACCESSORIES

     DA-066   DA-068       DA-070                  DA-606LK               DA-073    DA-067    DA-ROCK1

       (DA-606, DA-071, DA-072)

WIRELESS

 DRIVE-ALERT ACCESSORIES:

The DA-066 Remote Chime Transmitter

• 

 is used in combination with the wireless 

DA-068 Remote Plug-in Chime(s) 

and/

or the 

DA-070 Battery-operated Portable Chime(s) 

in applications where a more pleasant chime and alerts in more rooms/

areas of a home are desired.

This is standard on the DA-605P

.  Any number and combination of plug-in chimes and portable 

chimes may be used.
The

• 

DA-606LK Wireless Light Kit

 comes with a 

DA-606 Timer Control

, one 

DA-071 Light-Switch

, and one 

DA-072 Lamp 

Module

.  Any number and combination of light-switches and lamp modules may be used.  For heavy-duty applications the 

DA-073 Heavy-Duty Outlet 

        includes a top receptacle that handles up to a maximum of 1800 watts or maximum of

15 amps.

The DA-067 Antenna Stabilizer 

• 

is used with the DA-610 or DA-611 Sensors to prevent     transmitter antenna vandalism 

(i.e. animal or human) protection and/or environmental stability (i.e. high wind, blizzard conditions, animals perching, etc.).

The DA-ROCK1 

• 

is a popular accessory with all of our wireless systems, and is used to hide the DA-610 Sensor

DA-655

DA-052V  

 

DA-505

    DA-050

HARD-WIRED

 DRIVE-ALERT ACCESSORIES:

The Hard-Wired DA-655 Chime with Volume Control

• 

 is our most popular accessory for the model DA-600 Drive-Alert in 

Drive-up Window or business applications!

The DA-052V Whistle with Volume Control

• 

 – is used with the DA-600 when a second whistle is desired (hard-wired

installation)

The Hard-Wired DA-505 Timer Control

• 

 is used to with the DA-600 to turn on lights when the sensor detects a vehicle.

The DA-050 Power Pack

• 

 is a replacement power-pack/transformer for the Drive-Alerts.

If your Drive-Alert accessories 
do not look like these, you may 
have older models.  Please call 
Mier’s free tech support line at 
800-473-0213

Summary of Contents for Drive Alert DA-600

















Reviews: