8
WIRELESS DRIVE-ALERT OPTIONAL ANTENNA AND SENSORS
DA-660
DA-610TO DA-611TO
The DA-660 Long Range Antenna
is an option that can be used with all of Mier’s Wireless Drive-Alert Systems to boost the
reception-range from the sensor to the control panel up to 1/2- mile. This is a
factory installed accessory
and must be ordered at
the time of purchase by adding an “LR” to the end of the part number. Example: a DA-600 or DA-605P Drive-Alert with the with a
DA-660 long range option would be a
DA-600LR or DA-605PLR
.
The DA-610TO Sensor/Transmitter
is the standard sensor that comes with a DA-600 or DA-605P. The sensor and transmitter
are encased inside a durable NEMA 4 outdoor enclosure (see the DA-611TO if an external sensor is needed). The DA-610TO
monitors a 14 foot radius (28 foot sphere). Mier’s sensors/transmitters require two AA batteries which will last more than a year
under normal residential usage. These sensors may be placed up to 1000 feet from the control panel, and up to 2500 feet when
used with an “LR” system which includes the DA-660 Long Range Reception Antenna. The sensors are tamper resistant due to
the fact that if anyone touches or moves one, the alert will be triggered.
The DA-611TO Sensor/Transmitter
is an optional wireless sensor that can be used in place of, or in conjunction with, the
standard DA-610TO Sensor that comes with a DA-600 or DA-605P Drive-Alert. The DA-611TO is used in applications where
it is impossible to place a DA-610TO close to the driveway or area needing monitoring. The DA-611TO allows you to bury the
sensor right next to, or under, the driveway and then place the transmitter up to 50 feet away under some landscaping or up a
tree/pole (which also helps increase transmission reception). If you want this option without the standard DA-610TO, order a
Drive-Alert
control panel only
by adding a “CP” to the end of the part number as well as the DA-611TO. Example: a DA-600 or
DA-605P Drive-Alert with the DA-611TO would be a DA-600CP or DA-605CP
and
a DA-611TO. Note: If you order a DA-605CP,
make sure you also remember to order DA-068 and/or DA-070 chimes too. An unlimited number of, or combination of, wireless
sensors may be used to monitor several areas.
NOTE: If needed, Mier’s wireless systems can be completely battery operated allowing them to be entirely mobile.
See the following pages for Installation Instructions of these options
