2
INTRODUCTION TO THE 2012 WIRELESS DRIVE-ALERT FAMILY OF SYSTEMS
The Mier Products’ Wireless Drive-Alert Detection Systems give you the benefit of easy and economical wireless installation.
All Mier Wireless Vehicle Detection Systems includes 3 components:
1.
Receiver
2.
Sensor/Transmitter and
3.
Sound Annunciator or control
Mier’s Wireless Vehicle Detection Systems are the:
DA-600 containing an internal piezoelectric sounder AND use of Form C Dry Contacts
•
DA-605 with integrated “line of sight” transmission to multiple DA-068 plug-in chimes and DA-070 battery powered portable
•
chimes that include s choice of three different tones, as well as a set of Form C Dry Contacts
All Mier Wireless Vehicle Detection Systems feature:
UL Listed 110 volt AC plug-in
•
+24 volt DC power source for use with accessories
•
Relay output available for use by accessories or control (Form C Dry Contacts available)
•
Visible POWER LED to monitor power status and LO BATT LED to monitor transmitter batteries
•
User accessible address switches to set a unique address code between it and the transmitter
•
Normal reception to 1000 feet or ½ mile if using to the DA-660 Booster Antenna (see Options Page)
•
Use of an unlimited number of Mier Wireless Transmitters by a Receiver
•
100% compatibility with the Mier DA-610TO and optional DA-611TO Sensor/transmitters
•
Compatible with Mier Accessories detailed in this manual (See Accessories Page)
•
The DA-610TO Sensor/Transmitter and optional DA-611TO Sensor/Transmitter:
Complete portability
•
Operation on 2-AA (LR6) Alkaline or Rechargeable Batteries
•
Included circuitry to detect and transmit a low battery condition to the Receiver
•
A durable, lockable, standard brick size, weather sealed steel housing with mounting brackets
•
Detection of any disturbance in earth’s magnetic field (moving vehicles) and not people, animals & etc.
•
Sensor detection through standard building materials
•
EASY INSTALLATION IS OFTEN COMPLETED IN UNDER 30 MINUTES!
AS EASY AS 1, 2, 3 ...
Install 2 - AA batteries in the Sensor/Transmitter, turn it on and place it in the area you wish to monitor
1.
Set up the Receiver 4-6 feet above ground inside the home/building and plug it in
2.
Test the installation using a vehicle or other moving metal. Then, mount the control panel when performance is satisfactory
3.
(
4.
DA-605P model
) Place the Plug-in DA-068 Remote Chime(s), and/or DA-070 Portable Chime(s) in areas where you wish
the audible alert to sound
NOTE: All installations can be easily tested by plugging in the Receiver and turning on the Sensor/Transmitter, in the same
vicinity, which will send a radio signal to the Receiver for about one minute. The sounder or control will respond. If the sensor is
moved after the one minute interval, the receiver will be triggered (ex: walking while carrying the sensor/transmitter will trigger)
DA-600
DA-605P
