Miele WXF 660 Operating Instructions Manual Download Page 34

Page: 34 / 104

5. Adding detergent

Adding powder detergent

The detergent dispenser drawer
contains an insert for liquid detergent in
the



compartment as standard. This

insert must be removed to use powder
detergent.

It is

not possible

to use powder

detergent in the





compartment.

A prewash cannot be carried out when
using powder detergent.



Remove the detergent dispenser
drawer.



Remove the insert for liquid
detergents from the



compartment.



Replace the detergent dispenser
drawer.



Add powder detergent to the



compartment.

Useful tip:

Reinsert the insert into the

detergent dispenser drawer before next
using liquid detergent.

Useful tip:

Use TwinDos dispensing if

you want to run a program with the

Pre-

wash

extra option.

Summary of Contents for WXF 660









































































































Search results

Summary of Contents for WXF 660

Reviews:

Related manuals for WXF 660

Brands by name

Popular brands

Miele WXF 660, Operating Instructions Manual

Search results

Summary of Contents for WXF 660

Reviews:

Related manuals for WXF 660

Brands by name

Popular brands