Miele WXF 660 Operating Instructions Manual Download Page 25

Page: 25 / 104

2. Selecting a program

Switching on the washing
machine



Turn the program selector to a
program.

Program selection

There are three possible ways to select
a program:

1. Selecting the standard programs
with the program selector dial



Turn the program selector to the
required program.

The selected program will be shown in
the display. This will then be replaced
by the standard display.

2. Selecting additional programs by
setting the program selector to
“Additional programs/



” and using

the display:



Turn the program selector to the

Additional programs



position.

The following appears in the display:

Table Linens/Drapes











Touch the



sensor buttons until

the program you want appears in the
display.



Confirm the program with the

sensor button.

Pre-set program parameters will be
displayed, depending on the program
selected.

Summary of Contents for WXF 660









































































































Search results

Summary of Contents for WXF 660

Reviews:

Related manuals for WXF 660

Brands by name

Popular brands

Miele WXF 660, Operating Instructions Manual

Search results

Summary of Contents for WXF 660

Reviews:

Related manuals for WXF 660

Brands by name

Popular brands