Miele WXF 660 Operating Instructions Manual Download Page 60

Page: 60 / 104

Cleaning and care

TwinDos maintenance



Damage resulting from dried

laundry detergent.
If the system has not been used for a
long time (more than 2 months),
detergent in the hoses can become
viscous or dry out. The hoses can
become blocked and would then
need to be cleaned by Miele Service.
Clean the TwinDos system.

To clean the system, you either need a
“TwinDosCare” cleaning cartridge or
an empty TwinDos container, available
from
www.shop.miele.com.

The washing machine has a cleaning
program for the TwinDos system.
Running the cleaning program will clean
the hoses inside the washing machine.

Starting the maintenance program



Turn the program selector to the

Additional programs



position.

Table Linens/Drapes











Touch the



sensor buttons until

the following appears in the display:

Maintenance











Confirm the setting with the

sensor button.



Touch the



sensor buttons until

the following appears in the display:

TwinDos mainten.











Confirm the setting with the

sensor button.

Mainten. comp. 











Touch the



sensor buttons until

the compartment you want appears
in the display. Confirm with the

sensor button.

Start mainten.?











Touch the



sensor button until the

following appears in the display:

Start mainten.?









Yes



Confirm the setting with the

sensor button.



Follow the instructions in the display.

The hoses will now be cleaned. The
TwinDos system can be used again at
any time.

Cleaning the removable
compartment

Detergent residue can cause clogging.



Use a damp cloth to clean the
compartment interior when you
change the cartridges or container.

Summary of Contents for WXF 660









































































































Search results

Summary of Contents for WXF 660

Reviews:

Related manuals for WXF 660

Brands by name

Popular brands

Miele WXF 660, Operating Instructions Manual

Search results

Summary of Contents for WXF 660

Reviews:

Related manuals for WXF 660

Brands by name

Popular brands