Miele WXF 660 Operating Instructions Manual Download Page 72

Page: 72 / 104

Frequently Asked Questions



Clean it thoroughly.



Remove any foreign objects (e.g.
buttons, coins, etc.) and clean the
interior. Turn the impellers by hand to
check that they rotate freely.



Replace the drain filter correctly and
tighten it securely.



Close the drain pump flap.



Risk of water damage

Make sure the drain filter is securely
tightened. Otherwise there is a risk of
water leakage during use.
Replace the drain filter correctly and
tighten it securely.

Opening the door



Risk of injury due to rotating

drum.
Reaching into a rotating drum is
extremely dangerous.
Always make sure that the drum is
stationary before reaching in to
remove laundry.



Use a screwdriver to unlock the door.



Pull open the door.

Summary of Contents for WXF 660









































































































Search results

Summary of Contents for WXF 660

Reviews:

Related manuals for WXF 660

Brands by name

Popular brands

Miele WXF 660, Operating Instructions Manual

Search results

Summary of Contents for WXF 660

Reviews:

Related manuals for WXF 660

Brands by name

Popular brands