background image

Detergent

60

The correct detergent

All detergents produced for automatic
washing machines are suitable. Follow
the manufacturer's instructions and
dosage recommendations on the pack-
aging.

For users in Asia:
please use a low foaming detergent
suitable for use in front-loading ma-
chines

The right amount to dispense
will depend on the following:

– the soiling level of the load

– the quantity of the laundry

– the water hardness level.

Check with your local water supplier
if you do not know the hardness level
in your area.

Water softeners

A water softener can be used to cut
down on the use of detergents in areas
with water hardness levels II and III.
Dispense according to the amount spe-
cified on the packaging. First add deter-
gent and then the water softener.

You can then use the recommended
amount of detergent for water hardness
level I.

Water hardness levels

Hardness

scale

Hardness level

in mmol/l

German scale

°d

I (soft)

0 – 1.5

0 – 8.4

II (medium)

1.5 – 2.5

8.4 – 14

III (hard)

above 2.5

above 14

Dispensing aids

Use dispensing aids, (e.g. balls) if these
are supplied with the detergent, particu-
larly when using liquid detergent.

Refill packs of detergent

When purchasing detergent buy refill
packs wherever possible. This helps re-
duce the amount of waste packaging.

Fabric conditioner and liquid
starch

Fabric conditioner 
makes garments soft to handle and
helps prevent static cling when tumble
drying.

Starch 
stiffens and gives body to items of laun-
dry, e.g. shirts, tablecloths and bed
linen.

Summary of Contents for WCI 860

















































































































Reviews: