Miele WCI 860 Operating Instructions Manual Download

Page: 59 / 112

Changing the programme sequence

Changing a programme (safety
lock)

A programme, temperature, spin speed
or selected option cannot be changed
once the machine has been success-
fully started. This is to prevent the oper-
ation of the machine being tampered
with (by a child, for example).

Cancelling a programme

You can cancel a wash programme at
any time after it has started.



Turn the programme selector to the



position.



Turn the programme selector to the

Cottons

programme.

The following will appear in the display:

Cancel?









Yes



Touch the

sensor control.

The suds are pumped away. The follow-
ing will appear in the display:

Prog. cancelled













Wait until the



symbol in the display

goes out and the door unlocks.



Pull open the door.



Remove the laundry.

Interrupting a programme



Turn the programme selector to the



position.

The washing machine switches off.



To continue: turn the programme se-
lector to the position of the wash pro-
gramme that was started.

Cancel?









Yes



Touch the



sensor control.

The following will appear in the display:

Cancel?











Confirm with the

sensor control.

Tip:



Cannot be changed

appears in

the display, the programme selector is
in the incorrect position.

Summary of Contents for WCI 860

















































































































Search results

Summary of Contents for WCI 860

Reviews:

Related manuals for WCI 860

Brands by name

Popular brands

Miele WCI 860, Operating Instructions Manual

Search results

Summary of Contents for WCI 860

Reviews:

Related manuals for WCI 860

Brands by name

Popular brands