Miele WCI 860 Operating Instructions Manual Download

Page: 35 / 112

5. Add detergent

Detergent dispenser drawer

Any detergent suitable for automatic
front loading washing machines can be
used. Please observe the instructions
for use and dosage on the detergent
packaging.

Ensure that TwinDos dispensing is
deactivated.

Adding detergent



Pull out the detergent drawer and add
detergent to the compartments.



Detergent for the pre-wash



Detergent for the main wash and
soaking




Fabric softener, liquid starch, or
capsules

Adding fabric conditioner



Add fabric conditioner or liquid starch
to the



compartment.

Do not ex-

ceed the maximum level mark.

It will be automatically dispensed in the
final rinse. At the end of the programme
a small amount of water remains in the



compartment.

If starching frequently, thoroughly
clean the dispenser compartment,
especially the siphon tube, regularly.

Summary of Contents for WCI 860

















































































































Search results

Summary of Contents for WCI 860

Reviews:

Related manuals for WCI 860

Brands by name

Popular brands

Miele WCI 860, Operating Instructions Manual

Search results

Summary of Contents for WCI 860

Reviews:

Related manuals for WCI 860

Brands by name

Popular brands