Miele WCI 860 Operating Instructions Manual Download

Page: 45 / 112

Programme chart

Dark garments/Denim

Cold to 60 °C

Max. load 3.0 kg

Items

Black and dark items made of cotton, mixed fibre or denim

Tip

– Wash inside out.

– Denim often contains excess dye and may run during the first few

washes. Therefore, wash light and coloured items separately.

ECO 40-60

Max. load 9.0 kg

Items

Mixed loads of normally soiled garments for the

Cottons

pro-

gramme; sorted according to colour and can be washed at 40 °C–
60 °C.

Tip

Follow the instructions on the care label

Proofing

40 °C

Max. load 2.5 kg

Items

Treating microfibre fabric, ski wear or table linen made from mainly
synthetic fibres to provide a finish which is resistant to water and dirt

Tip

– The items must be freshly laundered and spun or dried before

proofing.

– For best results, the items should be heat-treated afterwards. This

can be achieved by drying them in the tumble dryer or ironing
them.

Summary of Contents for WCI 860

















































































































Search results

Summary of Contents for WCI 860

Reviews:

Related manuals for WCI 860

Brands by name

Popular brands

Miele WCI 860, Operating Instructions Manual

Search results

Summary of Contents for WCI 860

Reviews:

Related manuals for WCI 860

Brands by name

Popular brands