Miele WCI 860 Operating Instructions Manual Download

Page: 102 / 112

Settings

102

Disp. switch-off stat.

The display and the sensor control
lighting is switched off to save energy.
The

Start/Add laundry

sensor control

flashes slowly.

Selection

–

(factory default)

The lighting switches off after
10 minutes.

–

On (not current pr.)

The lighting remains switched on
throughout the programme. The light-
ing switches off 10 minutes after the
programme has ended.

–

Off

The lighting remains switched on.

Programme info

You can select the information that will
be displayed temporarily in the display
after a programme has been selected.

Selection

–

Programme name

The programme name is shown in the
display for several seconds.

–

Prog. & max load

(factory default)

The programme name and the max-
imum load size are shown in the dis-
play for several seconds.

–

Off

Directly after the programme has
been selected, the standard display
is shown with temperature, spin
speed and programme duration.

Memory

The washing machine will save the
last settings (temperature, spin speed
and some of the extras) selected for a
programme after the programme has
started.

When the programme is chosen again,
the saved settings will appear in the
display.

Memory is deactivated as standard.

Long p-wash Cotton

If you require a longer pre-wash, you
can extend the standard pre-wash
time of 25 minutes.

Selection

–

No increase

(factory default)

25 minute pre-wash.

–

+ 6 min

31 minute pre-wash.

–

+ 9 min

34 minute pre-wash.

–

+ 12 min

37 minute pre-wash.

Summary of Contents for WCI 860

















































































































Search results

Summary of Contents for WCI 860

Reviews:

Related manuals for WCI 860

Brands by name

Popular brands

Miele WCI 860, Operating Instructions Manual

Search results

Summary of Contents for WCI 860

Reviews:

Related manuals for WCI 860

Brands by name

Popular brands