Miele W 5928 WPS EcoComfort Operating Instructions Manual Download Page 40

Page: 40 / 88

Cancelling a programme

You can cancel a programme at any
time after it has started.

Press the

Start/Stop

button.

Options

Cancel programme

;

Activate safety lock

Press the

button.

The suds will be pumped away.

If you want to remove the laundry:

Press the

Door

button.

If you want to select a different
programme:

Switch the machine off with the

button.

Switch the machine back on again.

Check that there is still detergent in
the detergent drawer. Add detergent,
if necessary.

Select and start a new programme.

Interrupting a programme

Switch the machine off with the

button.

To continue with the same programme:

Switch the machine back on with the

button.

Changing a programme

After the start of a programme it is no
longer possible to select a different
programme.

Temperature

It is possible to select a different
temperature up to 5 minutes after the
programme has started.

Spin speed

It is possible to change the spin speed
up until the final spin begins.

Extra options

With the exception of the

Express 20

programme, it is possible to select or
deselect the

Short

and

Water plus

extra

options up to 5 minutes after the
programme has started.

It is not possible to make any
changes if the safety lock has been
activated.

Changing the programme sequence

Summary of Contents for W 5928 WPS EcoComfort

























































































Search results

Summary of Contents for W 5928 WPS EcoComfort

Reviews:

Related manuals for W 5928 WPS EcoComfort

Brands by name

Popular brands

Miele W 5928 WPS EcoComfort, Operating Instructions Manual

Search results

Summary of Contents for W 5928 WPS EcoComfort

Reviews:

Related manuals for W 5928 WPS EcoComfort

Brands by name

Popular brands