Miele W 5928 WPS EcoComfort Operating Instructions Manual Download Page 25

Page: 25 / 88

Add detergent

Too little detergent results in:

– Laundry not getting properly clean

and with time it may become grey
and hard to the touch.

– Greasy particles clinging to laundry.

– Limescale deposits on the heater

elements.

Too much detergent results in:

– Excessive foam which causes a low

level of agitation and poor wash,
rinse and spin results.

– High water consumption (an

additional rinse cycle will
automatically switch in).

– A burden to the environment.

1. Automatic dispensing of liquid

detergent

Press the

Automatic dispensing

button.

The degree of soiling will appear in the
display:

Degree of soiling

Q Q H HM

Normal

Press the

button to change

the degree of soiling level and
confirm this with the

button.

The appropriate amount of liquid
detergent will now be dispensed for the
programme.

See "Liquid detergent dispensing" for
more information.

2. Detergent dispenser drawer

If you want to run a programme using
powder detergent or special
application agents, these should be
added to the detergent dispensing
drawer.

Please note:

If using powder detergent or special
application agents, do not press the

Automatic dispensing

button, as this

will cause too much detergent to be
dispensed.

How to wash correctly

Summary of Contents for W 5928 WPS EcoComfort

























































































Search results

Summary of Contents for W 5928 WPS EcoComfort

Reviews:

Related manuals for W 5928 WPS EcoComfort

Brands by name

Popular brands

Miele W 5928 WPS EcoComfort, Operating Instructions Manual

Search results

Summary of Contents for W 5928 WPS EcoComfort

Reviews:

Related manuals for W 5928 WPS EcoComfort

Brands by name

Popular brands