Miele W 5928 WPS EcoComfort Operating Instructions Manual Download Page 44

Page: 44 / 88

The right amount to dispense will
depend on the following:

– The soiling level of the load

Lightly soiled
No visible dirt or stains. Possibly
slight body odour.

Normally soiled
Visibly dirty and/or just a few slight
stains.

Heavily soiled
Visible dirt and stains and/or dried on
soiling.

– The quantity of the laundry (add the

recommended amount of detergent)

– The water hardness level.

Check with your local water supplier
if you do not know the hardness level
in your area.

Water softeners

A water softener can be used to cut
down on the use of detergents in hard
water areas. Dispense according to the
amount specified on the packaging.
First add detergent and then the water
softener.

Use a quantity of detergent as for soft
water.

Miele do not recommend connecting
the machine to a household water
softener.

Washing with several components

If you wash using several components
(e.g. special application detergents),
we recommend always dispensing the
agents into compartment

in the

following order:

1. Detergent

2. Water softeners

3. Stain remover

This way the agents are distributed
more evenly.

Detergent

Summary of Contents for W 5928 WPS EcoComfort

























































































Search results

Summary of Contents for W 5928 WPS EcoComfort

Reviews:

Related manuals for W 5928 WPS EcoComfort

Brands by name

Popular brands

Miele W 5928 WPS EcoComfort, Operating Instructions Manual

Search results

Summary of Contents for W 5928 WPS EcoComfort

Reviews:

Related manuals for W 5928 WPS EcoComfort

Brands by name

Popular brands