Miele W 5902 Premium Plus Operating Instructions Manual Download Page 62

Page: 62 / 68

The following will appear in the display:

Lock code activated.
Entry OK

Once the washing machine is switched
off, it can only be used again if the lock
code is entered.

To use the washing machine when
the lock code is activated

When the washing machine is switched
on again, the display will request the
code.

Enter code 125 as described above
and confirm the entry.

The following will appear in the display:

Ready
Entry OK

The washing machine is now unlocked
and ready for use.

To deactivate the code

Proceed as for activating the lock code.

The following will appear in the display:

Lock code
deactivated.
Entry OK

Buzzer

When the buzzer function has been
activated, an audible tone sounds at
the end of a programme.

You can select one of two volumes or
switch the buzzer off.

Off

(The machine is delivered with this
option selected.)

The buzzer is switched off.

Normal

The buzzer sounds at the end of the
programme.

Loud

The buzzer sounds at maximum volume
(

laut

) at the end of the programme.

The option which is currently set will
have a tick

beside it.

Settings menu

Summary of Contents for W 5902 Premium Plus





































































Search results

Summary of Contents for W 5902 Premium Plus

Reviews:

Related manuals for W 5902 Premium Plus

Brands by name

Popular brands

Miele W 5902 Premium Plus, Operating Instructions Manual

Search results

Summary of Contents for W 5902 Premium Plus

Reviews:

Related manuals for W 5902 Premium Plus

Brands by name

Popular brands