Before using the machine for the first
time ensure that it is correctly
installed and connected. See
"Installation and connection". Also
check that the drain filter is securely
tightened to prevent the risk of leaks
during use.
This washing machine has
undergone a complete functional test
at the factory and there will be some
residual water in the drum from this
process.
Preparing the washing machine for use
is done in four stages. The washing
machine guides you automatically
through steps
1
to
3
.
For safety reasons, spinning is not
possible until the machine has been
prepared for using for the first time. To
activate the spinning function you must
run a wash programme without laundry
and without detergent.
Using detergent could result in an
excessive build-up of foam.
This also activates the ball valve. The
ball valve prevents detergent escaping
from the suds container into the sump
during a wash programme, thus making
maximum use of the detergent.
1. Welcome screen
^
Place the display template on top of
the control panel as shown.
^
Press the
K
button in.
M
Willkommen
The welcome screen will appear in
the display every time the washing
machine is switched on until a
programme lasting longer than
1 hour has been completed.
Before using for the first time
12
