Miele W 5902 Premium Plus Operating Instructions Manual Download Page 63

Page: 63 / 68

Keypad tone

An audible tone sounds each time a
button is pressed.

The washing machine is delivered with
the keypad tone switched off.

The option which is currently set will
have a tick

beside it.

Display brightness

There are ten display brightness
settings.

The washing machine is delivered with
the display brightness on setting 5.

The bar chart shows you the setting.

The brightness is set as soon as it is
selected.

Display contrast

There are ten display contrast
settings.

The washing machine is delivered with
the display brightness on setting 5.

The bar chart shows you the setting.

The contrast is set as soon as it is
selected.

Text brightness

There is a choice of ten settings for
the brightness of the text backlit
areas (backlighting of Start, Delay
start, Extra options and spin speeds)

The washing machine is delivered with
the text brightness on setting 5.

The bar chart shows you the setting.

The brightness is set as soon as it is
selected.

Settings menu

Summary of Contents for W 5902 Premium Plus





































































Search results

Summary of Contents for W 5902 Premium Plus

Reviews:

Related manuals for W 5902 Premium Plus

Brands by name

Popular brands

Miele W 5902 Premium Plus, Operating Instructions Manual

Search results

Summary of Contents for W 5902 Premium Plus

Reviews:

Related manuals for W 5902 Premium Plus

Brands by name

Popular brands