Miele W 5902 Premium Plus Operating Instructions Manual Download Page 22

Page: 22 / 68

Short

For light to normal soiling with no visible
staining.

The duration of the main wash is
reduced.

Soak

For heavily soiled and stained items
with protein stains (e.g. blood, fats and
oils, cocoa).

– A length of time of between 30

minutes and 2 hours can be
programmed in 30 minute
increments for the soak process.

– The default setting is 1 hour.

To programme in a different soak
period see "Settings - Soak".

Water plus

The water level in the main wash and
the rinses will be increased.

You can also select other settings for
the

Water plus

extra option. These are

described in "Settings - Water plus".

Pre-wash

For laundry with large amounts of dirt
e.g. dust, sand.

The following extra options can be
selected in addition to the programme:

Short Soak Water

plus

Pre-wash

Cottons

Minimum iron

Delicates

Dark garments /
Denim

Woollens

Extra options

Summary of Contents for W 5902 Premium Plus





































































Search results

Summary of Contents for W 5902 Premium Plus

Reviews:

Related manuals for W 5902 Premium Plus

Brands by name

Popular brands

Miele W 5902 Premium Plus, Operating Instructions Manual

Search results

Summary of Contents for W 5902 Premium Plus

Reviews:

Related manuals for W 5902 Premium Plus

Brands by name

Popular brands