The following fault messages appear in the display and the
programme stops
Fault message
Possible cause
Remedy
1)
2
Water inlet
fault
The water inlet is
blocked or
restricted.
Check whether
– the stopcock is opened
properly.
– the inlet hose is kinked.
– the water pressure is too low.
2
Drain fault
– The water outlet is
blocked or
restricted.
– The drain hose
has been fixed
too high.
– Clean the drain filter and the
drain pump.
– The maximum delivery head
is 1 m.
L
Waterproof
system has
reacted
The water protection
system has reacted.
– Close the stopcock.
– Call the Service Department.
;
Technical fault
F xxx
There is a fault.
Start the programme again.
If the fault message appears
again, contact the Service
Department.
1)
To switch off the fault indicator: Switch the machine off with the
K
button.
Problem solving guide
53
