Miele W 2859i WPM SUPERTRONIC Page 41 Operating Instructions Manual Download

Page: 41 / 88

Programme chart

Soft toys

cold to 40°C

Max. load 1.0 kg

Use for

Soft toys, specified as machine-washable by the manufacturer.

Note

Do not wash soft toys stuffed with straw.

Starch

Max. load 5.5 kg

Use for

For starching table cloths, serviettes and workwear

Notes

– Reduce the spin speed for fabrics which crease easily.

– The laundry should be washed but not treated with fabric

conditioner.

Separate rinse

Max. load 5.5 kg

Use for

For rinsing handwashed items.

Note

– Reduce the spin speed for fabrics which crease easily.

Spin

Note

Make sure you select the appropriate spin speed.

Drain

For draining water from the machine.

Summary of Contents for W 2859i WPM SUPERTRONIC

























































































Search results

Summary of Contents for W 2859i WPM SUPERTRONIC

Reviews:

Related manuals for W 2859i WPM SUPERTRONIC

Brands by name

Popular brands

Miele W 2859i WPM SUPERTRONIC, Operating Instructions Manual

Search results

Summary of Contents for W 2859i WPM SUPERTRONIC

Reviews:

Related manuals for W 2859i WPM SUPERTRONIC

Brands by name

Popular brands