With the help of the following notes, minor faults in the performance of this
machine, some of which may result from incorrect operation, can be put right
without contacting the Service Department.
,
Repair work to electrical appliances should only be carried out by a
suitably qualified person in strict accordance with current local and national
safety regulations. Repairs and other work by unqualified persons could be
dangerous. The manufacturer cannot be held liable for unauthorised work.
The programme does not start
Problem
Possible cause
Remedy
The display remains
dark.
There is no power to
the machine.
Check whether
– the mains plug is plugged in
and switched on.
– the fuse or circuit breaker has
tripped.
You are asked to
enter a code.
Access via a code
has been activated.
Enter the code and confirm the
entry. Deactivate the code if you
do not wish this message to
appear in the display the next time
the machine is switched on.
The display and the
sensors are not lit
up and the
Start
sensor is flashing.
To save energy the
display and sensor
illumination switches
off automatically.
Touch the
Start
sensor briefly. The
display and sensors will light up.
Problem solving guide
52
