Miele W 2653 WPS Operating Instructions Manual Download Page 29

Page: 29 / 72

Adding or removing laundry
after a programme has started

Laundry can be added or removed
after the programme has started when
using the following programmes:

– Cottons Universal

– Minimum iron

– Cottons Hygiene

– Automatic

– Quick wash

– Starch

Press the

Door

button to open the

drum door.

Add or remove items.

Close the drum door.

The programme will continue
automatically.

Please note:

Once a programme has started the
machine cannot recognise any
adjustment to the load.

For this reason, if laundry is added or
removed after the start of a programme,
the machine will always complete the
programme cycle for a full load.

This can alter the programme running
time shown in the display.

The door cannot be opened, if:

– the suds temperature is above

55°C

– the water is above a certain level.

– the programme has reached the

Spin

stage.

– the electronic programme locking

has been activated.

If you press the

Door

button when the

above conditions are present, the
following will appear in the display:

Machine locked

Changing the programme sequence

Summary of Contents for W 2653 WPS









































































Search results

Summary of Contents for W 2653 WPS

Reviews:

Related manuals for W 2653 WPS

Brands by name

Popular brands

Miele W 2653 WPS, Operating Instructions Manual

Search results

Summary of Contents for W 2653 WPS

Reviews:

Related manuals for W 2653 WPS

Brands by name

Popular brands