Miele W 2653 WPS Operating Instructions Manual Download Page 28

Page: 28 / 72

To cancel a programme

You can cancel a programme at any
time after it has started.

Press the

Start/Stop

button.

The suds will be pumped away and the
programme is cancelled.

If you want to remove the laundry:

Press the

Door

button.

If you want to select a different
programme:

Switch the washing machine off with
the

I-ON/0-OFF

button.

Switch the machine back on again.

To interrupt a programme

Switch the washing machine off with
the

I-ON/0-OFF

button.

To continue with the same programme:

Switch the machine on with the

I-ON / 0-OFF

button.

To change a programme

To change the programme or alter
the temperature

After the start of a programme it is no
longer possible to select a different
programme.

If you want to select another
programme or temperature you will
need to cancel the programme and
begin again.

To change the spin speed:

Press the OK button.

The spin speed will be shown
highlighted. You can use the

–

and

buttons to change the spin speed up
until the final spin begins.

Changing EXTRAS

The buzzer can be switched on or off
after a programme has started.

It is not possible to select or de-select
any of the other EXTRAS.

Please note that no changes are
possible if programme locking has
been activated.

Changing the programme sequence

Summary of Contents for W 2653 WPS









































































Search results

Summary of Contents for W 2653 WPS

Reviews:

Related manuals for W 2653 WPS

Brands by name

Popular brands

Miele W 2653 WPS, Operating Instructions Manual

Search results

Summary of Contents for W 2653 WPS

Reviews:

Related manuals for W 2653 WPS

Brands by name

Popular brands