Shortening the door panel
You can shorten the door panel to
match the height of adjacent kitchen
unit door fronts.
First of all you need to calculate
measurement
X
. This is the distance
from the lower edge of the washing
machine door to the lower edge of an
adjacent kitchen unit door front.
Procedure
^
Open the door.
^
First remove the door panel:
– to do this unscrew the 10 screws
(see arrows) from the inside machine
door.
^
Then remove the three decor strips
from the door panel:
– to do this unscrew the screws.
^
Shorten the door panel and the two
side decor strips at the bottom by
measurement
X
using a suitable saw.
^
Drill four holes for securing the lower
decor strip into the door panel.
^
Fit the decor strips and the door
panel.
If you are intending to fit a decor
panel, check whether this will also
need to be shortened.
Installation
52
