Miele W 2129 Operating Instructions Manual Download Page 18

Page: 18 / 68

Quick wash 40°C

Fabric

Very lightly soiled fabrics, which can be washed in the
Cottons programme.

Additional option

Water plus

Notes

–

Use less detergent (as for a half load).

–

If fabrics have a high proportion of man-made fibres it is
advisable to programme the machine for "Gentle Action".
See "Programmable functions". Note that this programme
is not suitable for delicate items.

Detergent

Powder detergent, detergent for coloured fabrics, liquid
detergent.

Max. load

2.5 kg

Automatic 40°C

Fabric

Small loads of garments made from man-made fibres and
cotton garments which can be washed together. Sort
according to colour.

Additional options

Soak, Pre-wash, Intensive, Water plus

Notes

–

For heavy soiling or where staining is visible, use the

Intensive

additional option.

–

If fabrics have a high proportion of man-made fibres it is
advisable to programme the machine for "Gentle Action".
See "Programmable functions".

Detergent

Powder detergent, detergent for coloured fabrics, liquid
detergent.

Max. load

3 kg

Starch

Fabric

Table cloths, napkins, overalls, aprons.

Notes

–

The laundry should be washed but not treated with fabric
conditioner.

Max. load

5 kg

Separate rinse

Fabric

Articles which have been washed by hand and only need to
be rinsed and spun in the machine.

Max. load

5 kg

Drain/Spin

Notes

–

Drain only: Select

Without spin

. Do not use for Woollens.

Max. load

5 kg

How to wash correctly

Summary of Contents for W 2129





































































Search results

Summary of Contents for W 2129

Reviews:

Related manuals for W 2129

Brands by name

Popular brands

Miele W 2129, Operating Instructions Manual

Search results

Summary of Contents for W 2129

Reviews:

Related manuals for W 2129

Brands by name

Popular brands