Technical Information
34
T1302, T1303, T1322, T1329ci, T1323c,
T1403 and T1405 Clothes Dryers
4.7
Thermostats (temperature limiters) - Removal
1. Remove the Rear Access Panel (010 4.6).
2. Note and disconnect the electrical connections.
3. Remove the screws.
4. Lift the Thermostat(s) from the Heater Bank Assembly.
4.8
Residual Moisture Sensor – Removal
Figure 030-7:
Wiring harness holder
1. Remove the Lid (010 4.1)
2. Remove the mount screw.
3. Release the wiring from the base plate / frame.
4. Disconnect the ground wire.
5. Access the Electronic (060 4.5).
6. Disconnect connector “JP1” from the Electronic.
7. Remove the assembly from the edge of the casing.
