Technical Information
50
T1302, T1303, T1322, T1329ci, T1323c,
T1403 and T1405 Clothes Dryers
4.2
Front Drum Bearing – Adjustment
(does not apply to all models)
Figure 050-3:
Drum bearing
1. Remove the front panel (010 4.3)
2. Refer to Figure 050-3.
3. Remove the Screws (4)
4. Turn the Eccentric Disc (1) back and forth, while checking the
gap between the drum neck and the fill ring.
5. When the gap is the same all around the drum neck, tighten the
screws (4).
6. Turn the drum by hand and recheck the gap between the drum
neck and drum support housing. Re-adjust as necessary.
