Miele SmartLine CS 7101-1 Page 9 Operating And Installation Instructions Download | Manualshive

Page: 9 / 72

background image

Warning and Safety instructions

9

Technical safety



Unauthorised installation, maintenance and repairs can cause

considerable danger for the user. Installation, maintenance and re-
pairs must only be carried out by a Miele authorised technician.



Damage to the wok can compromise your safety. Check the wok

for visible signs of damage. Do not use a damaged wok.



Temporary or permanent operation on an autonomous power sup-

ply system or a power supply system that is not synchronised with
the mains power supply (e.g. island networks, back-up systems) is
possible. A prerequisite for operation is that the power supply sys-
tem complies with the specifications of EN 50160 or an equivalent
standard.
The function and operation of the protective measures provided in
the domestic electrical installation and in this Miele product must
also be maintained in isolated operation or in operation that is not
synchronised with the mains power supply, or these measures must
be replaced by equivalent measures in the installation. As described,
for example, in the current version of BS OHSAS 18001–2 ISO
45001.



The electrical safety of this wok can only be guaranteed when cor-

rectly earthed. It is essential that this standard safety requirement is
met. If in any doubt please have the electrical installation tested by a
qualified electrician.



Before connecting the wok to the mains supply, ensure that the

connection data on the data plate (voltage and frequency) match the
mains electricity supply.
This data must be checked before connecting the appliance. Consult
a qualified electrician if in any doubt.



Do not connect the wok to the mains electricity supply by a multi-

socket unit or an extension lead. These do not guarantee the re-
quired safety of the appliance (fire hazard).

«
...
7
8
9
10
11
...
»

Summary of Contents for SmartLine CS 7101-1









































































Reviews:

No comments

Related manuals for SmartLine CS 7101-1

Maxi-Flex GK46TIMPS

Brand: V-ZUG Pages: 6

Brand: Hatco Pages: 12

Brand: K&H Pages: 17

Brand: Teka Pages: 124

Brand: Kalorik Pages: 24

KGH 6422T CI X FLAT

Brand: Kernau Pages: 68

Brand: SCHOLTES Pages: 16

Brand: Gorenje Pages: 28

Brand: Candy Pages: 66

Brand: AEG Pages: 80

Vario Gas-Wok 400 Series

Brand: Gaggenau Pages: 36

Brand: Caple Pages: 16

Brand: Caple Pages: 24

Brand: Caple Pages: 32

Brand: Cata Pages: 24

Brand: Pkm Pages: 42

Brand: Morgan Pages: 5

Brand: Hafele Pages: 18

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands