manualshive.com logo in svg

Miele SmartLine CS 7101-1, Operating And Installation Instructions, Page: 22 / 72

Share
Download
Miele SmartLine CS 7101-1 Operating And Installation Instructions Download Page 22

Before using for the first time

22

Please stick the extra data plate for
the appliance supplied with this doc-
umentation in the space provided in
the “After sales service” section of
this booklet.

Remove any protective wrapping and
stickers.

Cleaning the SmartLine ele-
ment for the first time

Clean all removable parts of the burn-
ers with a solution of warm water and
a small amount of washing-up liquid
applied with a soft sponge. Dry all
parts thoroughly after cleaning and
then reassemble the burners (see
“Cleaning and care”).

Clean the ceramic surface with a
damp cloth, and then wipe dry.

Switching on the SmartLine
element for the first time

The metal components have a protect-
ive coating. Smells and possibly some
vapours may occur when the SmartLine
element is used for the first time.

The smell and any vapours given off do
not indicate a faulty connection or ap-
pliance and they are not hazardous to
health.

Summary of Contents for SmartLine CS 7101-1









































































Reviews:

No comments