Installation
*INSTALLATION*
52
Installing several
SmartLine elements
The gaps between the individual Smart-
Line elements are sealed with a silicone
sealant that is heat-resistant to at least
160 °C. With flush-fit installation, the
gap between the SmartLine element(s)
and the worktop must also be sealed
with a silicone sealant that is heat-res-
istant to at least 160 °C.
After installation, the SmartLine ele-
ments must be easily accessible from
below, so that the bottom half of the
casing can be removed for mainten-
ance. If the SmartLine elements are not
accessible from below, the sealant must
be removed so that they can be re-
moved.
Combination with a downdraft ex-
tractor
If the SmartLine element is installed in
combination with a downdraft extractor,
the latter must be installed first.
Summary of Contents for SmartLine CS 7101-1
Page 18: ...Guide to the appliance 18 Wok a Wok burner b Trivet c Rotary controls ...
Page 44: ...Installation INSTALLATION 44 Worktop cutout surface mounted ...
Page 69: ......
Page 70: ......