manualshive.com logo in svg

Miele PWM 912, Operating And Installation Instructions

Share
Download
Miele PWM 912 Operating And Installation Instructions Download Page 49

Special features in the program sequence

49

Spinning

Final spin speed

When a program is selected, the maximum spin speed for this wash
program is shown in the display.

You can reduce the final spin speed.

However, you cannot select a final spin speed higher than that shown
in the chart.

Rinse-spin

There is a spin cycle after the main wash and between the rinse cy-
cles. A reduction in the final spin speed will also reduce the rinse-spin
speed as appropriate.

Omitting the final
spin (Rinse hold)

Select the 

Rinse hold

 extra option and then the 

Drain

 program. After

the last rinse cycle, the water will be pumped away and the Anti-
crease phase will switch on.

Anti-crease

At the end of the program, the drum continues to turn at intervals for
up to 30 minutes to help prevent creasing. The washing machine can
be opened at any time.

There is no anti-crease phase at the end of some programs.

Summary of Contents for PWM 912





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands