manualshive.com logo in svg

Miele PWM 912, Operating And Installation Instructions

Share
Download
Miele PWM 912 Operating And Installation Instructions Download Page 24

Selecting a program

24

Switching on the washing machine

Press the 

 button.

Selecting a program

11:02

Programs

Favorites

Supervisor

Help

There are different ways to select a program.

You can select a program from the 

Programs

 menu.

Touch the 

Programs

 sensor button.

11:02

Whites

Minimum Iron

Express

Normal

Delicates

Woolens

Programs

Scroll to the right in the display until the program you want appears.

Touch the sensor button for that program.

The display will change to the standard menu for that wash program.

Alternatively, you can select a program from the 

Favorites

 menu.

The programs under Favorites can be changed by the supervisor (see
“Supervisor level – Favorite programs”).

Touch the 

Favorites

 sensor button.

11:02

Whites

Whites

Normal

Woolens

Favorites

Scroll to the right in the display until the program you want appears.

Touch the sensor button for that program.

The display will change to the standard menu for that wash program.

In the case of Favorite programs, the majority of the program set-
tings are already fixed and cannot be changed.

Summary of Contents for PWM 912





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands