Installation
*INSTALLATION*
77
Installing the wine conditioning unit
If the wine conditioning unit is
pushed too far into the building-in
niche, the appliance door will not
close properly. This can cause ice to
build up and condensate to accumu-
late, and cause the appliance to mal-
function. These issues can all lead to
increased energy consumption.
Push the wine conditioning unit into
the niche, making sure a gap of
1 5/8" (42 mm)
is maintained all
round between the appliance and the
front of the housing unit side walls.
Push the wine conditioning unit into
the niche until the fixing brackets at
the top and bottom touch the front
edge of the housing unit side wall.
– With
5/8" (16 mm) thick
housing unit
walls:
The spacers should touch the front
edge of the housing unit side wall at
the top and bottom.
– With
3/4" (19 mm) thick
housing unit
walls:
The front edges of the top and bot-
tom hinges should be flush with the
front edge of the housing unit side
wall.
Check again that securing brackets at
the top and bottom are flush with the
front edge of the housing unit side
wall.
This ensures a distance of
1 5/8" (42 mm)
to the front edges of
the housing unit side walls all the way
round.
Close the appliance door and align
the wine conditioning unit with adja-
cent cabinetry.
Align the height of the wine condi-
tioning unit as necessary on both
sides with the adjacent cabinetry by
altering the adjustable feet using the
wrench supplied.
Summary of Contents for KWT 6722 iS
Page 47: ...Automatic defrosting 47 The wine conditioning unit defrosts au tomatically ...
Page 89: ......
Page 90: ......
