Miele KWT 6722 iS Operating And Installation Instructions Download

Page: 26 / 92

Selecting additional settings

Sabbath mode



The Sabbath mode supports the obser-
vance of religious customs.

The following are turned off:

– the interior lighting when the door is

opened,

– all acoustic and optical signals

– the temperature display,

– the DynaCool function (if previously

activated),

The following can be selected:

– the Settings sensor for turning off

Sabbath mode

– and the On/Off sensor

The Sabbath mode function will turn it-
self off automatically after approx. 120
hours.

Ensure that the wine unit door is prop-
erly closed as visual and audible
alarms are turned off.

Any interruption to the power supply
during this time will not be shown in
the display. After a power cut, the ap-
pliance restarts in Sabbath mode.

Turning on Sabbath mode



Touch the Settings sensor.

All symbols available for selection will
appear in the display and the



sym-

bol flashes.



Touch the sensors for setting the
temperature (





) repeatedly until

the



symbol flashes in the display.



Touch the OK sensor to confirm your
selection.

The last selected setting flashes and
the



symbol lights up in the display.



By touching the





sensor you

can now switch on Sabbath mode. To
do this, select the

setting.



Touch the OK sensor to confirm your
selection.

The selected setting is applied, the



symbol lights up.

Summary of Contents for KWT 6722 iS





























































































Search results

Summary of Contents for KWT 6722 iS

Reviews:

Related manuals for KWT 6722 iS

Brands by name

Popular brands

Miele KWT 6722 iS, Operating And Installation Instructions

Search results

Summary of Contents for KWT 6722 iS

Reviews:

Related manuals for KWT 6722 iS

Brands by name

Popular brands