Miele KWT 6722 iS Operating And Installation Instructions Download | Manualshive

Page: 5 / 92

background image

IMPORTANT SAFETY INSTRUCTIONS

5

When using the appliance, follow basic safety precautions, including the fol-
lowing:

Read all instructions before installation and use to prevent accidents and ma-
chine damage.

This wine conditioning unit complies with all current local and na-
tional safety requirements. Inappropriate use can, however, lead to
personal injury and material damage.

Read the operating and installation instructions carefully before
using the wine conditioning unit. They contain important informa-
tion on safety, installation, use, and maintenance. This is to protect
yourself from injury, and from damaging your wine conditioning
unit.

Please read and follow the instructions in the chapter on installing
the wine conditioning unit, as well as the safety instructions and
warnings.

Miele cannot be held liable for injury or damage caused by non-
compliance with these instructions.

Keep these instructions in a safe place and pass them on to any
future owner.



Risk of injury from broken glass.

If installed at altitudes above 4920 ft. (1,500 m), there is a risk of
the glass in the door breaking because of changes in air pressure.
Shards of glass can cause severe injury.

«
...
3
4
5
6
7
...
»

Summary of Contents for KWT 6722 iS





























































































Reviews:

No comments

Related manuals for KWT 6722 iS

Brand: GE Pages: 16

Brand: OBH Nordica Pages: 24

Brand: Oster Pages: 13

Brand: MiLAN Pages: 36

Brand: Westinghouse Pages: 8

Brand: Randell Pages: 14

Brand: Randell Pages: 2

Brand: Belling Pages: 48

Pizzarette PO-102929

Brand: emerio Pages: 44

Brand: Royal Catering Pages: 15

Brand: Aurora Pages: 13

Brand: Bluestone Pages: 12

Brand: Hisense Pages: 13

Brand: Adcraft Pages: 10

Brand: Clatronic Pages: 48

Brand: Panasonic Pages: 7

Brand: Panasonic Pages: 24

Brand: Panasonic Pages: 19

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands