Miele KWT 6722 iS Operating And Installation Instructions Download

Page: 68 / 92

Installation

*INSTALLATION*



Open the appliance door and remove
covers



and



on the left and right

of the wine conditioning unit.



Remove cover



from the bottom of

the appliance.



Unscrew the transport safety de-
vice



Tip:

Keep this device in a safe place for

refitting should the appliance need to
be moved in the future.



Risk of injury and damage.

The appliance door is not secure
once the screws in the hinges have
been removed.
The second person must support the
appliance door.



Risk of injury.

If the hinges close, there is a risk of
injury.
Leave the hinges open.



Slightly unscrew the bottom and top
screws from the hinges



. The appli-

ance door must be held by a second
person while you do this.



Remove the appliance door.



Carefully place the appliance door on
a soft surface.



Now undo the screws completely.



Risk of injury.

Do not close the hinges.

Summary of Contents for KWT 6722 iS





























































































Search results

Summary of Contents for KWT 6722 iS

Reviews:

Related manuals for KWT 6722 iS

Brands by name

Popular brands

Miele KWT 6722 iS, Operating And Installation Instructions

Search results

Summary of Contents for KWT 6722 iS

Reviews:

Related manuals for KWT 6722 iS

Brands by name

Popular brands