manualshive.com logo in svg

Miele KM 6113, Operating And Installation Instructions

Share
Download
Miele KM 6113 Operating And Installation Instructions Download Page 65

Electrical connection

*INSTALLATION*

65

Disconnecting from the mains

Risk of electric shock.

There is a risk of electric shock if the
appliance is connected to the mains
supply during repair or service work.
After disconnection, ensure the ap-
pliance cannot be switched back on
by mistake.

To disconnect the appliance from the
mains power supply, do one of the fol-
lowing depending on installation:

Safety fuses

Completely remove fuses.

Automatic circuit breakers

Press the (red) test button until the
middle (black) button springs out.

Built-in circuit breakers

Circuit breakers at least type B or C:
Switch the lever from 1 (on) to 0 (off).

Residual current device (RCD)

Switch the main switch from 1 (on) to
0 (off) or press the test button.

Mains connection cable

The hob must be connected to the elec-
trical supply with a special connection
cable, type H 05 VV-F (PVC insulated)
with a suitable diameter.

Please see wiring diagram for connec-
tion. (N.B. This appliance is supplied
single phase only in the UK / AUS / NZ).

See the data plate on the hob for the
correct voltage and frequency.

Replacing the electrical con-
nection cable

Risk of electric shock from mains

voltage.
Incorrect connection to the power
supply may result in an electric
shock.
The electrical connection cable must
only be replaced by a qualified elec-
trician.
The earth lead must be connected to
the point marked 

.

If the electrical connection cable needs
to be exchanged, it must be replaced
with a special connection cable, type
H 05 VV-F (PVC-insulated), available
from the manufacturer or Miele service.

The required connection data is
provided on the data plate.

Summary of Contents for KM 6113













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands