manualshive.com logo in svg

Miele KM 6113, Operating And Installation Instructions

Share
Download
Miele KM 6113 Operating And Installation Instructions Download Page 51

Safety instructions for installation

51

Damage risk from incorrect installation.

Incorrect installation can cause damage to the hob.
The hob must only be installed by a qualified person.

Risk of electric shock.

Incorrect connection to the mains supply may result in an electric shock.
The hob must be connected to the electrical supply by a qualified person only.

Damage from falling objects.

Take care not to damage the hob when fitting wall units or a cooker hood above
it.
Fit the wall units and the cooker hood before the hob.

 

The veneer or laminate coatings of worktops (or adjacent kitchen

units) must be treated with 100 °C heat-resistant adhesive which will
not dissolve or distort. Any backmoulds must be of heat-resistant
material.

 

The hob must not be installed over a fridge, fridge-freezer, freezer,

dishwasher, washing machine, washer-dryer or tumble dryer.

 

This hob must not be installed above ovens or cookers unless

these have a built-in cooling down fan.

 

After installation, ensure that nothing can come into contact with

the connection cable and that it is without hindrance.

 

The electrical cable may not come into contact with any moving

kitchen component (e.g. a drawer) or be subject to mechanical ob-
struction which could damage it.

 

Observe carefully the safety clearances listed on the following

pages.

All dimensions are given in mm.

Summary of Contents for KM 6113













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands