manualshive.com logo in svg

Miele KM 6113, Operating And Installation Instructions

Share
Download
Miele KM 6113 Operating And Installation Instructions Download Page 49

Problem solving guide

49

Problem

Cause and remedy

 lights up in the rear

left cooking zone dis-
play, 

 lights up in the

rear right cooking zone
display and numbers
light up in the front dis-
plays.

left 

, right 

 or 

, or 

, or 

A calibration fault has occurred after the reset func-
tion has been activated or after an interruption to the
power supply.

If the displays do not go out after 5 minutes, pro-
ceed as described under “The sensors show in-
creased sensitivity or fail to react”.

left 

, right 

left 

, right 

The overheating mechanism has triggered.

See “Overheating protection”.

left 

, right 

 or 

The fan is blocked or faulty.

Make sure it has not been blocked by something
like a fork. Remove the cause of the blockage.

If this fault code continues to appear in the dis-
play, contact Miele Service.



 and other numbers

There is a fault in the electronic module.

Interrupt the power supply to the hob for approx. 1
minute.

If the problem persists after power has been re-
stored, please contact Miele.

Summary of Contents for KM 6113













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands