Miele KM 6113, Operating And Installation Instructions

Page: 23 / 76

Induction
23
How it works
An induction coil is located under each
cooking zone. When a cooking zone is
switched on, this coil creates a mag-
netic field which impacts directly on the
base of the pan and heats it up. The
cooking zone itself is heated up indir-
ectly by the heat given off by the pan.
An induction cooking zone only works
when a pan with a magnetic base is
placed on it (see “Pans”). Induction
automatically recognises the size of the
pan.
The

symbol flashes alternately with
the power setting selected in one of the
cooking zone displays
- if the zone has been switched on
without a pan in place, or if the pan is
unsuitable (non-magnetic base),
- if the diameter of the base of the pan
is too small,
- if the pan is taken off the cooking
zone when it is switched on.
If a suitable pan is placed on the cook-
ing zone within 3 minutes, the

will go
out and you can continue as normal.
If no pan or an unsuitable pan is placed
on the cooking zone, the cooking zone
will switch off automatically after
3 minutes.

When the appliance is switched
on either deliberately or by mistake,
or when there is residual heat
present, there is the risk of any metal
items placed on the hob (e.g. cutlery)
heating up.
Danger of burning.
Do not use the appliance as a resting
place for anything else. Switch the
cooking zones off after use with the
appropriate sensor control.