manualshive.com logo in svg

Miele KM 6113, Operating And Installation Instructions

Share
Download
Miele KM 6113 Operating And Installation Instructions Download Page 37

Safety features

37

System lock / Safety lock

The system lock and safety lock are
deactivated if there is an interruption
to the power supply.

Your hob is equipped with a system
lock and a safety lock to prevent the
hob and the cooking zones being
switched on or any settings being
altered.

The 

system lock

 is activated when the

hob is switched off. When it is activ-
ated, the hob cannot be switched on
and the timer cannot be used. The hob
is programmed so that the system lock
must be activated manually. It can be
programmed to be activated automatic-
ally 5 minutes after the hob has been
switched off if the system lock is not
manually activated first (see “Program-
ming”).

The 

safety lock

 is set when the hob is

switched on. When the safety lock is
activated,

- the cooking zone power levels and

the timer settings cannot be
changed.

- the cooking zones, the hob and the

timer can be switched off, but once
switched off cannot be switched on
again.

If an unavailable sensor is touched
whilst the system lock or the safety lock
is activated, 

 will appear in the front left

and 

 will appear in the front right cook-

ing zone display after a few seconds.

Activating

Touch the 

+

 and  

-

 sensors at the

same time until 

 appears in the front

left and 

 appears in the front right

cooking zone display and a tone
sounds.



 will go out after a short while.

Deactivating

Touch the 

+

 and 

-

 sensors at the

same time until 

 goes out from the

front left and 

 goes out from the

front right cooking zone display and a
tone sounds.

Summary of Contents for KM 6113













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands