When you tap the sensors, you will see
the following changes in the display:
– When first tapped: The
last
temperature selected
flashes.
– Each subsequent touch of a sensor:
The temperature is adjusted in 1 °C
steps.
– Leaving a finger on the sensor: The
temperature changes continuously.
Approximately 5 seconds after you
release the sensor, the
actual
temperature in the appliance will be
displayed.
or
^
Touch OK to confirm your selection.
When you have adjusted the
temperature, wait for
approx. 6 hours
if the appliance is not very full
and for
approx. 24 hours if the appliance is
full
before checking the temperature
display, as it will take this long for the
appliance to reach the temperature.
If, after this time, the temperature is still
too high or too low, you will need to
adjust it again.
Temperature range
The temperature can be adjusted:
– in the refrigerator section from 1 °C
to 9 °C
– in the freezer section from -15° C to
-26° C.
The correct temperature
28
Summary of Contents for KFNS37452iDE
Page 102: ...102 ...
