Miele KFNS37452iDE Operating And Installation Instructions Download Page 36

Page: 36 / 104

By touching the

sensor you

can now select:

: keypad tone off; door alarm off

: keypad tone off; door alarm on

(after 4 minutes)

: keypad tone off; door alarm on

(after 2 minutes)

: keypad tone on; door alarm on

(after 2 minutes)

Touch the OK sensor to confirm your
selection.

The selected setting is saved and the

)

symbol flashes.

Touch the settings sensor to leave
settings mode.
Otherwise, the electronics will leave
settings mode automatically after
approx. one minute.

Display brightness

You can adjust the display brightness
to suit the light conditions in the room.

The display brightness can be adjusted
in steps from

. The factory default

setting is

(maximum brightness).

Changing the display brightness

Touch the settings sensor.

All selectable symbols appear in the
display and the

symbol flashes.

Touch the sensors for setting the
temperature (

) repeatedly until

the

symbol flashes in the display.

Touch the OK sensor to confirm your
selection.

The last selected setting flashes in the
display and the

symbol lights up.

Further settings

Summary of Contents for KFNS37452iDE









































































































Search results

Summary of Contents for KFNS37452iDE

Reviews:

Related manuals for KFNS37452iDE

Brands by name

Popular brands

Miele KFNS37452iDE, Operating And Installation Instructions

Search results

Summary of Contents for KFNS37452iDE

Reviews:

Related manuals for KFNS37452iDE

Brands by name

Popular brands