Miele KFNS37452iDE Operating And Installation Instructions Download Page 37

Page: 37 / 104

By touching the

sensor you

can adjust the display brightness:

: minimum brightness

: medium brightness

: maximum brightness

Touch the OK sensor to confirm your
selection.

The selected setting is saved and the

symbol flashes.

Touch the settings sensor to leave
settings mode.
Otherwise, the electronics will leave
settings mode automatically after
approx. one minute.

Sabbath mode

The appliance offers a Sabbath
programme for the purposes of
religious observance.

The following are switched off:

– the interior lighting when the door is

opened

– all acoustic and optical signals

– the temperature display

– SuperCool or SuperFreeze (if

previously switched on)

– the ice cube maker (if previously

switched on)

The following can be selected:

– the settings sensor for switching off

Sabbath mode

– and the On/Off button.

Ensure that the doors are properly
closed, as optical and acoustic
alarms are switched off.

Any power failure during this time is
not shown in the display. After a
power failure, the appliance restarts
in Sabbath mode.

Further settings

Summary of Contents for KFNS37452iDE









































































































Search results

Summary of Contents for KFNS37452iDE

Reviews:

Related manuals for KFNS37452iDE

Brands by name

Popular brands

Miele KFNS37452iDE, Operating And Installation Instructions

Search results

Summary of Contents for KFNS37452iDE

Reviews:

Related manuals for KFNS37452iDE

Brands by name

Popular brands